Optoma DLP ZU1700, User Manual

Page: 6 / 120

English 6
‡ Disconnect the power plug from the AC outlet if the product will not be used for a long period of time.
‡ Do not setup the projector in places where it might be subjected to vibration or shock.
‡ Do not touch the lens with bare hands.
‡ Do not clean the lens when the projector is turned on. Any damage resulting from doing so will void the
warranty.
‡ Remove battery/batteries from remote control before storage. If the battery/batteries are left in the
remote for long periods, they may leak.
‡ Do not use or store the projector in places where smoke from oil or cigarettes may be present, as it
can adversely affect the quality of the projector performance.
‡ Please follow the correct projector orientation installation as non standard installation may affect the
projector performance.
‡ Use a power strip and/or surge protector. As power outages and brown-outs can KILL devices.
‡ Warning: Do not remove the earthing pin on the mains plugs. This apparatus is equipped with a three
prong earthing type mains plug. This plug will only fit an earthing-type mains socket. This is a safety
feature. If you are unable to insert the plug into the mains socket, contact an electrician.
‡ Caution: This equipment is equipped with a three-pin grounding-type power plug. Do not remove the
grounding pin on the power plug. This plug will only fit a grounding-type power outlet. This is a safety
feature. If you are unable to insert the plug into the outlet, contact an electrician.
Light Intensity Hazard Distance
This product is classified as CLASS 1 LASER PRODUCT - RISK GROUP 2 of IEC 60825-1 : 2014 and also complies
with 21 CFR 1040.10 and 1040.11 except for conformance as a Risk Group 2 LIP as defined in IEC 62471-5:Ed. 1.0.
For more information, see Laser Notice No. 57, dated May 8, 2019.
When set up with A22, A23 and A27 lens (throw ratio greater than 2.0), this projector may become Class 1 Laser
Product-Risk Group 3 (RG3); with other lens (throw ratio less than 2.0), this projector may become Class 1 Laser
Product-Risk Group 2 (RG2) according to IEC 60825-1:2014 and IEC 62471-5: 2015, and also make a variance
approvals under 21 CFR 1010.4 for RG3 LIP according to Classification and Requirements for Laser Illuminated
Projectors (LIPs) (Laser Notice No. 57).
Projection Lens Throw Ratio Classification and Requirements for Laser Illuminated Projectors (LIPs)
‡ A11 ‡ 0.65-0.75
‡ HD: N/A
‡ IEC 62471-5: 2015
‡ IEC 60825-1: 2014
‡ CLASS 1 LASER PRODUCT RISK GROUP 2
‡ A18 ‡ 0.84-1.02
‡ A19 ‡ 1.02-1.36
‡ A20 ‡ 1.2-1.5
‡ A21 ‡ 1.5-2.0
Projection Lens Throw Ratio Classification and Requirements for Laser Illuminated Projectors (LIPs)
‡ A22 ‡ 2.0-4.0 ‡ HD:1.165 meters
‡ IEC 62471-5: 2015
‡ IEC 60825-1: 2014
‡ CLASS 1 LASER PRODUCT RISK GROUP 3
‡ A23 ‡ 4.0-7.2 ‡ HD:4.12 meters
‡ A27 ‡ 7.2-10.8 ‡ HD:6.4 meters
Laser radiation safety information
To ensure safe operation, read all laser safety precautions before installing and operating the projector.
‡ This projector is class 1 laser product of IEC/EN 60825-1:2014 and risk group 2 with the requirements of IEC
62471-5:2015.
‡ This projector uses extremely high brightness laser. Do not stare directly into the light beam, as the extremely
high brightness may cause permanent eye damage. (Risk Group 2 of IEC 62471-5:2015).
‡ No direct exposure to the beam shall be permitted. (Risk Group 3 of IEC 62471-5:2015).
‡ This product is not for household use.
‡ Possibly hazardous optical radiation emitted from this product.
‡ This projector has a built-in Class 4 laser module. Never attempt to disassemble or modify the laser module.