English 29
USING THE PROJECTOR
Powering on / off the projector
Powering on
1.
Securely connect the AC power cord and signal/source cable to the projector.
2.
Set the power switch to the “
I
“ (ON) position and wait until the power button “ ” on the projector
keypad is solid orange.
3.
Turn on the projector by pressing the
ON
button “ ” on the remote control or the power button “ ” on
the projector keypad.
The status LED is orange with a long blink and the status LED will turn to solid green.
REMOTE IN
REMOTE OUT
IN
PU
T
IN
PU
T
or
Rear view
Side view
Note:
If the projector is turned on for the first time, you will be prompted to select the projector language, projection
orientation, and other settings.
Summary of Contents for DLP ZU1700
Page 1: ...DLP Projector...
Page 12: ...English 12 INTRODUCTION Bottom view 1 No Item 1 Security bar...
Page 120: ...www optoma com...
