English 43
BASIC OPERATIONS
Tap
Bluetooth
to configure Bluetooth settings and access other Bluetooth devices. Make sure Bluetooth
function is enabled. Tap any of the following:
-
Device Name
to change the device name.To confirm, tap
OK
at the prompt.
-
Scan again
to detect nearby Bluetooth devices. The detected Bluetooth devices are listed under Available
Devices and paired devices are listed under Paired Devices. To connect to a Bluetooth device, tap on the
MAC address of the device in Available Devices list. Then follow on-screen instructions to perform pairing.
Configuring Device Settings
In
Advanced Settings
menu, tap
to open the
Device
menu, then complete the following steps:
Tap
HDMI out Encryption Setting
to enable or disable encrypting HDMI out signal with HDCP.
Note:
If the connected monitor does not support HDCP, disable HDMI out encryption function.
