CREATING A REDUNDANT STRATEGY
SNAP PAC Redundancy Option User’s Guide
36
6.
Click the Download tab.
7.
In the Flash Memory section, make sure that both of these options are checked:
–
Save strategy to flash memory after download
–
Set autorun flag after download
8.
Click OK.
Step 2. Adding a Redundant Control Engine to a PAC Control
Strategy
In order to access PAC Redundancy Manager from within PAC Control, or to create a strategy to
control a system with controller redundancy, you must first add a control engine to your strategy
that is configured for redundant controllers. You can either add to your strategy the control engine
you created in
“Creating a Control Engine for Controller Redundancy” on page
you can configure a control engine from within PAC Control.
Adding an Existing Redundant Control Engine
If you’ve already created a control engine for redundancy (
), add it to your strategy using
these steps. If you need to modify a control engine for redundant controllers, see the next section,
“Configuring an Existing Control Engine for Redundancy” on page
.
1.
Make sure you have connected the hardware and configured a redundant system as described
in the two previous chapters.
2.
With a strategy open in PAC Control in Configure mode or Online mode, choose Configure
Control Engine.
