SNAP PAC R-Series Controller User’s Guide
65
65
A: SNAP Mounting Racks and
Power Supplies
INTRODUCTION
As shown in the illustration below, a SNAP PAC R-series I/O system has a SNAP PAC R-series controller, SNAP
rack, power supply, and modules. This appendix includes wiring diagram examples for assembling your SNAP
PAC R-series controller, SNAP PAC rack, and power supply. For more information, especially for wiring
information on modules, see the data sheet and the installation or user’s guide for your specific products.
SNAP MOUNTING RACKS
CAUTION:
Make sure you are using the correct rack for your controller. Using the wrong rack will severely damage
the controller. Correct racks are shown below:
Controller
Rack
Modules
Power supply
Use these controllers
With these racks
More info
SNAP-PAC-R1
SNAP-PAC-R1-FM
SNAP-PAC-R1-W
SNAP-PAC-R2
SNAP-PAC-R2-FM
SNAP-PAC-R2-W
SNAP-PAC-RCK4
SNAP-PAC-RCK4-FM
SNAP-PAC-RCK8
SNAP-PAC-RCK8-FM
SNAP-PAC-RCK12
SNAP-PAC-RCK12-FM
SNAP-PAC-RCK16
SNAP-PAC-RCK16-FM
data
sheet (form 1684)
