DVR Server Manual ver.6.05/rel.120909
84
Chapter6 Mobile Client
1.
Recommended Mobile Telephone Requirements
①
Before you run Mobile Client, please ensure your mobile phone
supports JAVA and complies with the following applicable standards:
CLDC version: CLDC-1.0
MIDP version: MIDP-2.0
②
Your mobile telephone should have GPRS or CDMA to transport data.
③
Set Internet as the access point of your phone call.
④
Select
―Enable‖ to allow the PDA to connect to DVR server in the
⑤
To use PDA connection normally, the DVR board should support dual
compression and user must open sub channel compression in
User should select
―CIF‖ or ―QCIF‖ but not ―same as recording‖ for remote
【
Remote Image size
】
.
Note: GPRS may be charged by data flow, so shut down the MobileDVR application if you do
not need to view cameras to avoid unnecessary charges.
6.2
Download software
You have following methods to download our mobile client software:
1)
Download through wireless technology (in Wireless LAN) such as
Blue tooth, infrared.
2)
Copy mobile client software to phone directly through data cable.
3)
Download mobile client software through OTA (in WAN), it will
describe as follow:
Enter ―http://IP:PORT/mobiledvr ‖ in the address bar of the mobile
telephone internet explorer to download the setup package of the Mobile
Client.
Note:
IP: the IP address of the DVR server.
PORT: the Port of the IE client of the DVR server.
When you download mobile client software on WAN, you must be sure that your mobile phone
connect with Internet correctly.