DVR Server Manual ver.6.05/rel.120909
6
1.4
Main Interface
1.4.1
Show tips
1. When the mouse moves closely or stops above a button, a text tip will
be shown to interpret the function of it immediately.
2. Zoom in/out video image: Left-Double-Click a camera window to zoom
in/out of the video image (or
).
3. System will detect cards and read the total number automatically, and
the corresponding number buttons will be displayed dynamically.
4. Recording status:
a. This icon means the system is recording normally.
b. This icon means the system is recording manually.
c. This icon means the system is recording in motion detection.
d. This icon means the system is recording in sensor detection.
1.4.2
Screen menu
Press the TAB key or Page UP (select next camera window) and Page
Down (select previous camera window) key on keyboard to select one live
camera window.
1.
Full screen
Single-Right- Click image area, it will popup a menu, then select
―full
screen
‖ to change display mode to full screen (or
).
When you want to resume origin mode, you should Single-Right- Click image
area and select
―Restore display‖.
2.
Instant playback
Single-Right-Click desired camera window and select
―Instant playback‖
(except IP Camera, it can just play back instantly in the window that is not
used). After that, choose a time from the submenu, and then system will play
back video data of current camera in current window according to your
selection (E.g.: you select 1min, system will play back previous 1 minute
video data of current camera in current window). Also, you can play back
video data of one current live camera in a window that is not used by any
cameras (always black background with no
―Video Loss‖ information, IP
