User Manual – eSX
OptiPro Systems, LLC.
Page 17 of 111
Last Modified: 8/27/2014
5.2.3
Door Interlock
The
DOOR INTERLOCK
simply locks or unlocks the main door of the machine. While in the Active
position the door is locked and all controller functions are available for use. Override unlocks the door
and only allows the most basic functions such as jogging, mainly for cleaning or service.
Figure 5-8: Door Interlock Selector Switch
5.2.4
Emergency Stop
The
EMERGENCY STOP
(
E-STOP
) button should be used to stop the machine if there is any danger to the
operator, machine, or process. Once the button is pressed all motion will stop and servos will be turned
off. Function of the operator panel cannot be restored until the
E-STOP
button is released.
Figure 5-9: Emergency Stop Button
Twist in the direction of the arrows to release the
E-STOP
button. Pressing
RESET
then
SERVOS
on the
jog panel is also required to return the machine to a fully operational state. See Section 6.3 for more
information.
