T | +44(0)1306 710120 E | [email protected]
OPTIMUS KIT
INSTALLATION GUIDE
!
TELGUARD POWER SUPPLY UNITS MUST BE USED AND SHOULD NOT POWER ANY OTHER EQUIPMENT.
A SITE SIGNAL NETWORK TEST IS TO BE UNDERTAKEN BEFORE INSTALLATION
CONFIGURATIONS
AND
CONNECTIONS
MAIN OPTIMUS KIT HUB PCB
WHEN CHANGING RELAY MODULES
z
Power Off
z
Ensure Correct Alignment
SEE REVERSE FOR INSTALLATION TIPS
HUB and SATELLITE
CONNECTIONS:
– External Speaker from
Satellite Panel(s)
– 12V Supply to Satellite
– External Mic from
Satellite Panel(s)
– External CAN Bus
to/from Satellite Panel(s)
Wire Hi to Hi / Lo to Lo /
0V to 0V
OPTIMUS KIT I/O BOARD
Used ONLY in Optimus KIT Satellite Panel
OPTIMUS KIT ECO SAT PCB
Used ONLY in Optimus KIT Satellite Panel
Expansion CAN Bus
Socket for Displays,
Keypads etc.
OK
LED
GREEN
Flashing
= Normal Operation
Onboard Solid State Relay
60V AC/DC
200 mA
STATUS LED
RED
Closed