IMPORTANT INSTRUCTIONS:
PLEASE READ AND SAVE THESE IMPORTANT SAFEGUARDS
Thank you for choosing an Optimus fan. To ensure the best performance from your Fan, please read and
save the following instructions.
WHEN USING ELECTRICAL APPLIANCES, BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSONS, INCLUDING THE
FOLLOWING:
•
Read all instructions before using this product.
•
Use this fan only as described in this manual. Any other use not recommended by the manufacturer may
cause fire, electrical shock or injury to person, and may void the warranty.
•
Always unplug the unit before assembling, disassembling or cleaning.
•
Always unplug unit when not in use, when moving from one location to another and before cleaning.
•
To disconnect, grip the plug and pull it from the wall outlet. Never yank the cord.
•
The use of attachments not recommended or sold by the appliance manufacturer may cause hazards.
•
Avoid contact with moving parts.
•
DO NOT operate this fan with a damaged cord or plug, after a malfunction, or is dropped or damaged in
any manner. Return the unit to Optimus Enterprise, Inc. for examination, electrical or mechanical
adjustment, or repair.
•
Do not operate this fan in the presence of explosive and/or flammable fumes.
•
Do not place the fan or any parts near an open flame, cooking or other heating appliance.
•
Extreme caution is necessary when fan is used by or near children or invalids and whenever the fan is left
operating and unattended.
•
This product is intended for household use only and not for commercial or industrial use. Do not use
outdoors.
•
Always use on a dry level surface.
•
Do not operate if the fan housing is removed or damaged.
•
A loose fit between the AC outlet and plug may cause over heating of the plug. Have a qualified electrician
replace the outlet.
•
DO NOT run cord under carpeting. Do not cover cord with throw rugs, runners or like. Arrange cord away
from traffic area and where it could be tripped over.
•
This fan is equipped with a polarized alternating current line plug (a plug having one blade wider than the
other). This plug fits into the power outlet only one way. This is a safety feature. If you are unable to insert
the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact an electrician
to replace the obsolete outlet. Do not defeat the safety purpose of polarized plug.
•
NEVER connect the fan to any power sources other than a 120 volt alternating current polarized outlet.
•
WARNING: To reduce the risk of electric shock. DO NOT use this fan with any solid-state speed control
and DO NOT insert finger or any object into grill.
CLEANING/MAINTENANCE INSTRUCTIONS:
During Season Care:
•
Before cleaning, be sure to turn off and unplug the unit.
•
Keep the fan clean. Carefully wipe the unit with a soft, damp cloth. Please be very cautious near the
motor.
•
DO NOT immerse the fan in water and never allow water to drip into the Motor Housing.
•
Never use gasoline, benzene or thinner. This will damage the surface of the unit.
•
After cleaning, be sure to completely dry the unit with a cloth or towel.
After Season Care:
•
Your fan can be stored in the off-season.
•
Before putting the fan in storage, clean it thoroughly, cover it with a vinyl bag, and store it in a cool
and dry place. We recommend using the original (or appropriately sized) box.
OPERATING INSTRUCTIONS:
PRE-OPERATING INSTRUCTIONS:
⚫
Carefully remove your fan from the box (please save the carton for off-season storage).
⚫
For shipping purposes, the fan is packed unassembled.
⚫
Make sure the unit is in the OFF position before
plugging the unit into the outlet.
ASSEMBLY INSTRUCTIONS:
⚫
Loosen the base clip from fan body.
⚫
Put the front base on rear base, align
the screw holes, then tighten the screws
to secure both bases together. (See Fig.1)
⚫
Insert the fan body into the fan base.
Then retighten the base clip to secure the
fan body onto the base.
⚫
Loosen one screw on the cord clip. Put
the power cord under the cord clip then
retighten the screw. (See fig.1)
OPERATING INSTRUCTIONS:
•
Plug the power cord into a wall outlet.
•
Speed is controlled by turning the rotary switch on the top of the fan.
•
0—Off, 1—Low, 2—Medium, 3—High
•
The airflow can be angled to left or right side by turning the rotary switch to the left side. If
you want to stop angling. Turn the switch to right side.
SERVICE INSTRUCTIONS:
•
Do not attempt to repair or adjust any electrical or mechanical functions on this unit. Doing
so will void the warranty.
•
If you have any questions regarding this unit’s operation or believe any repair is necessary,
please call 1-888-672-5832 to speak with a Customer Service Representative. Or e-mail us
at [email protected]. You will be able to get a faster response through email.
•
If you need to exchange the unit, please return it, in its original carton with a sales receipt
enclosed, to the store where you purchased it. If you are returning the unit more than 30
days after the date of purchase, please see the enclosed warranty.
•
If you have any other questions or comments, feel free to write us:
Optimus Enterprise, Inc., Customer Service Department
2201 E. Winston Road, Unit #J, Anaheim, CA92806
Tel: (714) 956-1300
E-mail: [email protected]
