Optimus Enterprise, Inc.
2201 E. Winston Road, Unit #J
Anaheim, CA 92806
E-mail: [email protected]
TEL: 714-956-1300
USER SERVICING INSTRUCTIONS:
* Grasp the plug and remove it from the receptacle or other outlet device. Do not
unplug by pulling on the cord.
* Open the fuse cover. Slide open the fuse access cover on top of attachment plug
towards blades.
* Remove the fuse carefully. Push the fuse from the other side or turn the fuse holder
over to remove the fuse.
* Risk of fire. Replace the fuse only with 5A, 125 volt fuse.
* Close the fuse cover. Slide closed the fuse access cover on top of the attachment
plug.
* Risk of fire. Do not replace attachment plug. Contains a safety device(fuse) that
should not be removed. Discard product if the attachment plug is damaged.
* Do not attempt to repair or adjust any electrical or mechanical functions on this unit.
Doing so will void the warranty.
* If you have any questions regarding this unit's operation or believe any repair is
necessary, please call 1-888-672-5832 to speak with a Customer Service
Representative.
* If you need to exchange the unit, please return it, in its original carton with a sales
receipt enclosed, to the store you purchased it from.
* If you are returning the unit more than 30 days aner the date of purchase, please see the
enclosed warranty. If you have any other question or comments, feel free to write us:
Optimus Enterprise, Inc. 2201 E. Winston Road, Unit
Anaheim, CA 92806
E-m ail: Service.OptimusEnt@gm ail.com
TEL: 714-956-1300
OPERATING INSTRUCTIONS
* Place fan on a firm level surface. Plug the power cord (11) into any standard 120V AC,
60Hz outlet. Please make sure the Selector (Speed Control, 7) is on the OFF position.
Warning: A loose fit between the AC outlet and plug may cause over heating on the plug.
Have a qualified electrician to replace the outlet.
* Rotate the switch (7) to choose the speed desired. O-off, I-Low, 2-med, 3-high.
* Push the oscillating knob (8) down to make the fan oscillates and pull it up to stop the
oscillating.
OPERATING INSTRUCTIONS:
PRE-OPERATING INSTRUCTIONS:
⚫
Carefully remove your fan from the box (please save the carton for off-season
storage).
⚫
Make sure the unit is in the OFF position before plugging the unit into the outlet.
ASSEMBLY INSTRUCTIONS:
•
Set the rear grill (6) in front of the motor
housing (9) with the handle up and
secure the grill by 4 screws (5) provided.
•
Install fan blade (3) on the motor shaft
and secure by the screw (4) provided.
•
Put the front grill (1) in front of rear grill
and secure both grills by the grill ring (2)
by tightening the screw (13). You may
lose the screw (13) a little to let both grills
set in the ring before tightening.
•
Tilting and adjusting the fan head to the desired angle or airflow and tighten the
neck setting screw (10).
OPERATING INSTRUCTIONS
•
Place fan on a firm level surface. Plug the power cord (11) into any standard 120V
AC, 60HZ outlet. Please make sure the Selector (Speed Control, 7) is on the OFF
position.
Warning: A loose fit between the AC outlet and plug may cause over
heating on the plug. Have a qualified electrician to replace the outlet.
•
Rotate the switch (7) to choose the speed desired. 0-off, 1-Low, 2-med, 3-high.
•
Push the oscillating knob (8) down to make the fan oscillates and pull it up to stop
the oscillating.
