Optimus 120-2154 User Manual Download Page 1

 
High-Power In-Dash AM/FM Stereo CD Player 
(120-2154/55)              Features                   Faxback Doc. # 48528 
 
    This document contains instructions for both Cat. No. 120-2154 and  
    120-2155 stereos.  (You can find the Cat. No. of your model on the top 
    of the stereo.)  120-2154 has a LOUD button while 120-2155 has an FSM  
    button.  Unless otherwise noted, these are the primary differences 
    between the two units listed. 
 
Your Optimus High-Power In-Dash AM/FM Stereo CD Player has many practical, 
easy-to-use features, and you can install it in almost any vehicle.  The 
stereo's anti-theft control panel lets you quickly remove it, making the 
stereo inoperative.  The auto travel programming feature lets you store 
strong local stations into a separate travel memory. 
 
Memory tuning, seek and scan tuning, and FM optimizer circuitry all help 
make your stereo's operation simple and quick to help you drive safely. 
 
CAUTION:  Use common sense.  Do not change your stereo's settings in heavy 
          traffic or during hazardous driving conditions. 
 
CD PLAYER 
 
Audible Search - lets you rapidly play a CD in either direction to locate 
                 a desired section of a track. 
 
    Intro Scan - scans and plays the first 10 seconds of each track, so 
                 you can find a specific track. 
 
  Shuffle Play - randomly selects and plays tracks from the loaded CD. 
 
   Repeat Play - automatically repeats the current track. 
 
AM/FM STEREO TUNER 
 
          Band Button - lets you easily select one of the stereo's AM or 
                        FM bands. 
 
   Memory Scan Tuning - scans all stations stored in memory, playing for 
                        5 seconds on each. 
 
        Memory Tuning - lets you quickly store and tune up to 18 of your 
                        favorite stations (6 AM and 12 FM). 
 
          Auto Travel - lets you automatically store the first 6 strong 

Summary of Contents for 120-2154




























Reviews: