7
HAIR DRYER SW-5222
OPERATING INSTRUCTIONS
GB
17. Keep your hair away from the immediate vicinity of inlet opening to prevent from being drawn in.
18. Store the appliance in a cool, dry place. Do not use it when there is water in your hands.
DRYING
1. Put the plug in the wall socket.
2. Switch the appliance on by selecting the desired setting.
The airflow and temperature can be adjusted:
Speed setting and heating setting:
“0” OFF
“I’ LOW SPEED AND LOW HEAT
“II” HIGH SPEED AND HIGH HEAT
“
” flow of cool air, after drying hair, can use the “Cool”
button to set style with a continuous flow of cool air.
3. Dry your hair by making brushing movements while holding
the dryer at a small distance from your hair.
STYLING ATTACHMENTS
CONCENTRATOR
The concentrator enables you to direct the airflow at your hair
that you are styling.
Connect the concentrator by simply snapping it onto the
appliance. Disconnect it by pulling it off.
CLEANING
1. The appliance can be cleaned with a dry cloth.
2. The attachments can be cleaned with a moist cloth or rinsed
under a running tap.
Remove the attachments from the appliance before cleaning
them. Make sure the attachments are dry before using or
storing them.
Never rinse the appliance with water.
STORAGE
When not in use “unplug it.”
Allow the appliance to cool and store it in a dry location. This
hair dryer features a loop allowing it to be conveniently hung
on a hook for easy access. Never wrap the cord around the
appliance since this will cause the cord to wear prematurely
and break. If the supply cord of this appliance becomes
damaged the appliance must be replaced by returning to the
retailer from which the product was purchased or a similarly
qualified person in order to avoid a hazard.
SPECIFICATION:
Supply voltage: 220-240 V~ 50/60 Hz
Power: 1800 W — 2200 W
Level noise: 80 dB (A)
ECOLOGY – ENVIRONMENTAL PROTECTION
The “crossed-out trash bin” symbol on electrical
equipment or packaging indicates that the device
cannot be treated as general household waste and
should not be disposed of into containers for such waste.
Obsolete or broken-down electrical device
should be
delivered to special designated collection points, organized
by local public administration, whose purpose is to collect
recyclable electrical equipment.
This way, each household helps reduce possible negative
effects influencing natural environment and allows the
reclaiming of materials which the product is made of.
Weight: 0.52 kg
℮
