Microprocessor supported styling
Thanks to its highly sophisticated microprocessor and its LED
control display, the Hair Curling Iron allows you to personalise
your settings.
•.
Individual temperature choice: Using the temperature
selection button (I), you can adjust the temperature in
a range between 120°C and 180°C. We recommend the
following temperature settings.
Hair structure
Temperature
setting
Fine, porous, coloured, bleached
120
0
C
Strong, resistant
. . . and for professional styling results
180
0
C
The higher the temperature setting, the faster you will get
.
a curling result. When working with the maximum temperature
setting, you should not treat the same strand more than once.
•. .
Express heat up time: After only 60 seconds, the appliance
is ready for use.
•. .
Safety auto off: For safety reasons, the appliance
automatically switches off after 60 minutes. If you want
to keep on straightening, simply press the «on» button (G)
again shortly.
Getting started
• Connect the appliance to an electrical outlet and push the
.
«on» button (G) for 2 second to turn it on.
• After approx. 60 seconds, the display turns green indicating
that the minimum styling temperature is reached. You can
start using the appliance.
Styling
• Make sure your hair is completely dry before using the
appliance.
• Use a comb to untangle and separate hair 2’’ wide by 1/2’’
thick even sections.
• Use the thumb press to open the clamp and place the end
of one section of hair evenly across the barrel and close the
clamp. For a smoother curling make sure the ends are under
the clamp.
• Keep the section of hair tight, wind the barrel upward as far
as you would like the curl go. Be careful not to touch the
scalp with the hot barrel.
• Hold the barrel in place for 10-15 seconds. The amount of
hair rolled each time has a dramatic effect on the type of
curl you will achieve. For ringlet curls use less hair and for
loose wavy curls add more hair.
• Apply pressure to the thumb press to release the curl and
unwind the hair from the barrel.
• To help fix the curls in place allow them to cool before final
styling.
IMPORTANT:
Unplug the curling iron after use, and let it
cool down on a heat resistant surface, allow it to cool in a safe
position. Do not leave the product unattended while plugged in.
This curling iron achieves very high salon temperatures.
After use
After each use, switch off the appliance by pushing the «off»
button (H) for 2 seconds.
Cleaning
Always unplug before cleaning. Never immerse the appliance
in water. Clean the appliance with a damp cloth and use a soft
cloth to dry.
Subject to change without notice.
This product conforms to the European Directives EMC
89/336/EEC and Low Voltage 2006/95/EC.
STORAGE
.
Ensure that the curling iron is completely cool and dry. Do
not wrap the supply cord around the appliance. Store it in the
original box or in a cool, dry and safe place out of children’s
reach.
SPECIFICATION:
Power supply: 220-240V 50Hz
Power consumption:
.35W.
Ecology – Environmental Protection
The “crossed-out trash bin” symbol on electrical
equipment or packaging indicates that the device
cannot be treated as general household waste and
should not be disposed of into containers for such waste.
Obsolete or broken-down electrical device
should be
.
delivered to special designated collection points, organized by
local public administration, whose purpose is to collect recy
-
clable electrical equipment.
This way, each household helps reduce possible negative
.
effects influencing natural environment and allows the
.
reclaiming of materials which the product is made of.
Weight:
SW-2026 / SW-3026: 257 g
e
SW-2029 / SW-3029: 281 g
e
