OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
Version 1.0.1 2014-05-16
Page 91
Original operating instructions
TU2506 | TU2506V | TU2807 | TU2807V
GB
1.9.3 Lathe chuck protection with position switch
The lathe is provided with a lathe chuck
protection. The lathe can only be
switched on if the lathe chuck protection
is closed.
Img.1-4:
Lathe chuck protection
1.9.4 Lathe chuck key
The lathe is equipped with a special key
for chucks. Once the lathe chuck key has
been released, it is pushed out of the
lathe chuck by a spring.
CAUTION!
Only operate the lathe using this key.
Img.1-5:
Lathe chuck key
1.10
Safety check
Check the lathe regularly.
Check all safety devices
before starting work,
once a week,
after every maintenance and repair work.
Lathe chuck pro-
tection
closed
Lathe chuck
protection
open
integrated
Position switch
Safety lathe chuck
key
General check
Equipment
Check
OK
Protective covers,
lathe chuck protection
Mounted, firmly bolted and not damaged
Signs, Markings
Installed and legible
