Optimum Optimum 3292385, Operating Instructions Manual, Page: 10 / 80

Safety
Version 1.0.4 - 2020-10-13 10 Translation of original instruction
SD500AV
EN
SD500A
V_G
B
_1.
fm
may only be performed by an operator if they are described in these instructions and if the ope-
rator has been specifically trained to perform them by the operating company.
Qualified electrician
With professional training, knowledge and experience as well as knowledge of respective stan-
dards and regulations, qualified electricians are able to perform work on the electrical system
and recognise and avoid any possible dangers.
Qualified electricians have been specially trained for the working environment, in which they are
working and know the relevant standards and regulations.
Qualified personnel
Due to their professional training, knowledge and experience as well as knowledge of relevant
regulations, qualified personnel are able to perform the assigned tasks and to independently
recognise and avoid any possible dangers.
Instructed person
Instructed persons were instructed by the operating company regarding the assigned tasks and
any possible risks of improper behaviour.
1.7.2 Authorized persons
WARNING!
Inappropriate operation and maintenance of the metal belt saw constitutes a danger for
the personnel, objects and the environment.
Only authorized staff may operate the metal belt saw!
Persons authorized to operate and maintain should be trained technical personnel and
instructed by the ones who are working for the operating company and for the manufacturer.
The operating company must

train the personnel,

instruct the personnel in regular intervals (at least once a year) on
- all safety standards that apply to the machine,
- the operation,
- generally accepted engineering standards.

check the personnel‘s knowledge level,

document the training/instruction,

have attendance at the training/instruction confirmed by signature and

check whether the personnel is working safety and risk-conscious and observes the opera-
ting instructions.
The operator must

have obtained a training regarding the handling of the metal belt saw,

know the function and mode of action,

before taking the machine in operation
- have read and understood the operating manual,
- be familiar with all safety devices and instructions.
Additional requirements apply for work on the following machine components:

Hydraulic: Only specialists with special knowledge/experience in these areas.

Electric components or operating materials: Must only be worked on by a qualified electri-
cian or person working under the instructions and supervision of a qualified electrician.