Version 1.0.4 - 2020-09-08
61
Translation of original instructions
MZ2S
EN
MZ
2S
_G
B_5-
2.f
m
5.4.5 Lubricating the milling head
Using a grease gun, lubricate the lubricating nipples weekly with about 100ml of grease with a
lithium-soap base, e.g. Mobilux 3. Check the smooth running of the bearings after lubrication.
Adjusting the spindle bearing on page 67
Abb.5-3: Lubricating nipple milling head
5.4.6
Ball screw, X axis
Using a grease gun, lubricate the lubricating nipple monthly with about 50ml of grease with a lit-
hium-soap base, e.g. Mobilux 3. Check the smooth running of the ball screw after lubrication.
Abb.5-4: Spindle, X axis
Lubricating nipple
Lubricating nipple
Lubricating nipple
