Operation
Version 1.0.4 - 2020-09-08
44
Translation of original instructions
MZ2S
EN
MZ
2S
_G
B_4.
fm
4.14
Fastening horizontal table
CAUTION!
When milling with the vertical milling table - horizontal table is dismantled, chip and
spray guard is dismantled - e.g. when mounting a dividing apparatus on the vertical table
-, the machine operator must take additional precautions to ensure safe operation.
We recommend mounting e.g. a dividing apparatus on the horizontal table and adjusting
the milling spindle to horizontal milling in order to maintain the same machining method.
The milling table is fixed to the vertical table with four T-slot screws DIN 787 M14 x 50.
The T-slots are executed similar to DIN 650.
14
45
°
25
23
Ty
p
e C
1
11
Fastening
Horizontal table
a = 14-0
+0.018
b = 25
c = 11
h = 25
= 0.005 a
n
a
45
°
r2
b
c
h
DIN 650
