OPTIMUM
M A S C H I N E N - G E R M A N Y
Version 1.0.1 dated 2015-12-17
Page 67
Original operating instructions
MH25V
GB
4.2.1 Control panel
4.3
Switching the milling machine on
Switch on the master switch.
Unlock the emergency stop button.
Close the spindle protection system.
Switch the control on.
4.4
Switching the milling machine off
Switch off the master switch.
"Switching-off and securing the milling machine“ on page 56
CAUTION!
Only press the EMERGENCY STOP button in a genuine emergency. You should not use
the EMERGENCY STOP button to stop the machine during normal operation.
4.5
Resetting an emergency stop situation
Unlock the emergency stop button again.
Switch the control on again.
Switch on the spindle rotation again.
4.6
Power failure, Restoring readiness for operation
Switch the control on again.
Switch on the spindle rotation again.
4.7
Speed setting
The speed may be continuously adjusted in the range from 200 - 4000 rpm using the rotary
knob on the control panel.
Item
Designation
Item
Designation
13
Emergency stop button
15
Spindle rotation ON
16
Spindle rotation OFF
17
Spindle speed setting
18
Spindle direction selection
19
Control ON
13
17
15
16
18
19
