OPTIMUM
M A S C H I N E N - G E R M A N Y
Version 1.3.0 dated 2016-12-16
Page 46
Original operating instructions
MF2 Vario
GB
Img.5-3:
Grease points
Always slightly oil bare surfaces.
INFORMATION!
Make sure that the coolant lubricants and oils are not split on the floor. Clean up any spilt liquid
or oils immediately using proper oil-absorption methods and dispose of them in accordance
with current legal requirements on the environment.
5.4
Maintenance
The type and level of wear depends to a large extent on the individual usage and operating
conditions. For this reason, all the intervals are only valid for the authorised conditions.
at the begin-
ning of the
shift
Perform a safety check.
every month
Check that all clamping screws are firmly in place, every six months.
Check for wear in the V-belts in the spindle head.
as required
Top up cooling lubricant. Wash the cooling lubricant pump.
6
3
1
