Maintenance
Version 1.0.9 dated 2019-05-13
Page 60
Translation of the original instructions
GH 10T | GH 15T
GB
GH10T_G
H15T_G
B_5.
fm
OPTIMUM
M A S C H I N E N - G E R M A N Y
®
6
Maintenance
In this chapter you will find important information about
Inspection
Maintenance
Repairs
of the drill bit grinder.
ATTENTION !
Properly performed regular maintenance is an essential prerequisite for
operational safety,
failure-free operation,
long service life of the drill bit grinder and
the quality of the products which you manufacture.
Installations and equipment from other manufacturers must also be in good order and condition.
6.1
Safety
WARNING!
The consequences of incorrect maintenance and repair work may include:
Heaviest injuries of the persons working on the drill bit grinder
Damages on the drill bit grinder
Only qualified staff should carry out maintenance and repair work on the drill bit grinder.
6.1.1
Preparation
WARNING!
Only work on the drill bit grinder when the mains plug is disconnected.
6.1.2
Restarting
WARNING!
Before starting the drill bit grinder imperatively make sure that there are
no dangers generated for persons,
that the drill bit grinder is not damaged.
6.2
Inspection and maintenance
The type and extent of wear depends to a large extent on individual usage and service condi-
tions.
Clean the drill bit grinder in regular intervals from grinding dust. Soiling in the guideways
and bearings caused by grinding dust result in considerable wear. Use a vacuum cleaner in
order to clean the drill bit grinder from grinding dust.
6.3
Repairs
Request for a service technician of the company Optimum Maschinen Germany GmbH for all
repairs or send us the drill bit grinder.
If the repairs are carried out by qualified technical staff, they must follow the indications given in
these operating instructions.
The company Optimum Maschinen Germany GmbH does not take any liability nor does it
guarantee against damage and operating malfunctions resulting from failure to observe this
operating instructions.