OPTIMUM
M A S C H I N E N - G E R M A N Y
Appendix
Version 1.2.5 dated 2017-03-10
Page 111
Original operating instructions
DH26GTV | DH28GSV | DH32GSV
GB
The following items are also not subject to liability or warranty claims:
- Wearing parts and components which are subject to a standard wear as intended such
as e.g. V-belts, ball bearings, illuminants, filters, sealings, etc.
- Non reproducible software errors
Any services, which OPTIMUM GmbH or one of its agents performs in order to fulfil any
additional warranty are neither an acceptance of the defects nor an acceptance of its obli-
gation to compensate. These services neither delay nor interrupt the warranty period.
The court of jurisdiction for legal disputes between businessmen is Bamberg.
If any of the aforementioned agreements is totally or partially inoperative and/or invalid, a
provision which nearest approaches the intent of the guarantor and remains within the
framework of the limits of liability and warranty which are specified by this contract is
deemed agreed.
10.3.1 Change information operating manual
Chapter
Short summary
new version number
All
Removal of the coolant system on DH26GT; DH 28 GS
1.0.1
Technical specification
Distance spindle - table, distance spindle - machine base,
weight of the machine,
1.0.1
All
Integration of DH32GS
1.0.2
DH28GS
Mechanical modification, handling tool removing
1.0.2
3
Installation foot switch DH32GS
1.0.3
2 + 6
New machine base , therefore modificated assembly draw-
ings, spare part drawings
1.0.4
1 + 2 + 4 + 5 + parts + CE
Machine type DH32GSV integrated, advanced information
about inspection obligations, new EMC Directive, new
LowVoltage Directive
1.1.0
1 + 2 + 4 + 5 + parts + CE
•
Machine type DH26GTV / DH28GSV integrated
•
Machine DH26GT / DH28GS / DH32GS created as
separate manual
1.2.0
3 + 4 + electrical parts
Foot switch for DH26GTV, DH28GSV
1.2.1
6
Maintenance task DH32GSV oiler
1.2.2
parts
Permanently lubricated plain bearings, pos. 73, 121, 122
1.2.2
parts, 4
new touch panel
1.2.3
3
Notes on the circuit breaker
1.2.4
parts + 2 + 4
DH32GS automatic feed 0.1 / 0.05mm/rev
1.2.5