Maintenance
Version 2.1.1 - 2020-07-27
41
Translation of original instruction
B40 GSP
EN
B40G
SP_
GB_5
.f
m
First after 200
operatingm
hours, then
every 2000
operating
hours
Dri
ll head
Ch
an
ging
th
e oil
in
th
e gea
r of th
e dr
illin
g
sp
in
dle slee
ve
For oil change use an appropriate collecting tray of sufficient
capacity.
Unscrew the screw from the drain hole.
Img.6-4: Changing the oil in the gear of the drilling
spindle sleeve
Re-fill the gear with gear oil. Approx. consumption 4.5 litres.
Pay attention to the correct level.
Operating material on page 19.
Start of shift
after every
maintenance
or repair work
Dril
l h
e
ad
Oil level of the g
ear
fo
r
th
e sp
in
dle sleev
e feed
Check the oil level in the inspection glass The sight glass
should be half-covered.
Img.6-5: Oil level of the gear for the spindle sleeve
feed
Interval
Where?
What?
How?
Oil level in oil
inspection window