OPTIMUM
M A S C H I N E N - G E R M A N Y
Operation
Version 1.0.2 2017-04-11
Page 27
Original operating instructions
RD3
GB
The machine is in proper working order.
The machine is used as prescribed.
Follow the operating instructions.
All safety devices are installed and activated.
All failures should be eliminated immediately. Stop the machine immediately in the event of any
anomaly in operation and make sure it cannot be started up accidentally or without authoriza-
tion.
Notify the person responsible immediately of any modification.
"Safety during operation“ on page 15
4.3
Before starting work
Before starting work, select the desired speed. It is depending on the used drilling diameter and
on the material.
INFORMATION
A cooling or lubricating agent should be used when drilling.
The workpieces need to be tensed inflexibly and stably.
If required, adjust the desired drilling depth by means of the drilling depth stop in order to obtain
a uniform drilling depth.
WARNING!
Seizing of clothes and / or hair.
Make sure to wear well-fitting work during drilling work.
Do not use gloves.
If necessary, use a hairnet.
WARNING!
For drilling jobs, it is necessary to clamp the workpiece firmly to prevent the bit catching
on the pieces. A suitable clamping tool is a machine vice, clamping jaws, or a device for
clamping production parts.