OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
21 / 07 / 2014
Page 11
Safety Upright drill B34 H/ B34 H Vario ; Version 1.0.5
2
014
US
WARNING!
If you bypass, remove or override a safety device in any other way, you are endangering
yourself and other persons working on the upright drill. The possible consequences are
the following
•
injuries due to components or parts of components flying off a high speed,
•
contact with rotating parts,
•
fatal electrocution.
The upright drill includes the following safety devices:
an EMERGENCY-STOP switch,
a drilling machine table with T-slots to fasten the workpiece or a vise,
a protective cover for the pulleys with positioning switch.
WARNING!
The separating protective equipment which is made available and delivered together with
the machine is designed to reduce the risk of workpieces or fractions of them which
being expelled, but not to remove them completely.
1.8
Safety check
Check the upright drill at least once per shift. Inform the person responsible immediately of any
defect or change in the operation function.
Check all safety devices
at the beginning of each shift (with the machine stopped),
once a week (with the machine in operation),
after every maintenance and repair work.
Check that the prohibition, warning and information labels as well as the markings on the upright
drill
are legible (clean them, if necessary),
are complete.
INFORMATION
Use the following overview to organise the inspections.
General inspection
Item
Inspection
OK
Protective cover
Mounted, securely tightened and not damaged
Signs, markings
Installed and legible
Date:
Inspector (signature):
Functional test
Item
Inspection
OK
EMERGENCY-STOP-
push button
Once the emergency stop button is activated, the upright
drill should be switched off.
Date:
Inspector (signature):
