manualshive.com logo in svg

Optimum B 24 H, Operating Manual

Share
Download
Optimum B 24 H Operating Manual Download Page 36

OPTIMUM

M A S C H I N E N   -   G E R M A N Y

Operation

Version 2.2.2  dated 2014-03-07

Page 36

Original operating instructions

B24H | B24HV | B28H | B28HV

GB

4

Operation

4.1

Safety

Use the machine only under the following conditions:

The machine is in proper working order.

The machine is used as prescribed.

The operating manual is followed.

All safety devices are installed and activated.

All failures should be eliminated immediately. Stop the machine immediately in the event of any
anomaly in operation and make sure it cannot be started up accidentally or without authoriza-
tion

Notify the person responsible immediately of any modification.



 "Safety during operation“ on page 16

4.2

Control and indicating elements

4.2.1 Drilling machine B24H - B24HV

Img.4-1:   B24HB24HV

Pos.

Designation

Pos.

Designation

1

Belt drive with housing

2

Lever for spindle sleeve feed

3

Emergency stop

4

On/Off Control

5

Drill chuck

6

Drilling table

7

Table height adjustment

8

Lever for belt tension

1

1

2

2

3

3

4

4

5

5

8

8

6

6

7

7

Summary of Contents for B 24 H





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands