manualshive.com logo in svg

Optimum B 24 H, Operating Manual

Share
Download
Optimum B 24 H Operating Manual Download Page 28

OPTIMUM

M A S C H I N E N   -   G E R M A N Y

Assembly

Version 2.2.2  dated 2014-03-07

Page 28

Original operating instructions

B24H | B24HV | B28H | B28HV

GB

3.5.2 Assembly of the drilling machine table B24H - B24HV

Push the toothed rack into the drilling table.

Adjust the toothed rack within the drilling 
machine table in a way that the teeth of the 
toothed rack cam into the spiral wheel of the 
support for the drilling machine table.

Push the drilling table with the toothed rack 
on the drilling column.

Img.3-2:

Assembling drilling table B24H

3.5.3 Assembly of the drilling machine table B24H - B24HV

Push the toothed rack 
into the drilling table.

Adjust the toothed rack 
within the drilling 
machine table in a way 
that the teeth of the 
toothed rack cam into 
the spiral wheel of the 
support for the drilling 
machine table.

Push the drilling table 
with the toothed rack 
on the drilling column.

Img.3-3:

Assembly drilling table B28H

Drilling table

Toothed rack

Drill column

Drilling table

Toothed rack

Drill column

Summary of Contents for B 24 H





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands