OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
Version 2.2.2 dated 2014-03-07
Page 17
Original operating instructions
B24H | B24HV | B28H | B28HV
GB
1.16.1 Mechanical maintenance work
Remove or install protection and safety devices before starting any maintenance work and re-
install them once the work has been completed.This includes:
Covers,
Safety indications and warning signs,
Earth (ground) connections.
Check if they are working properly!
1.17
Accident report
Inform your superiors and Optimum Maschinen Germany GmbH immediately in the event of
accidents, possible sources of danger and any actions which almost led to an accident (near
misses).
There are many possible causes for "near misses".
The sooner they are notified, the faster the causes can be eliminated.
1.18
Electrical system
Have the machine and/or the electrical equipment checked regularly, at least every six months.
Immediately eliminate all defects such as loose connections, defective wires, etc.
A second person must be present during work on live components to disconnect the power in
the event of an emergency.
Immediately disconnect the drilling machine if there are any anomalies in the power supply!
