OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
Version 2.2.2 dated 2014-03-07
Page 14
Original operating instructions
B24H | B24HV | B28H | B28HV
GB
1.10
EMERGENCY-STOP push button
ATTENTION!
Also after actuating the
EMERGENCY-STOP switch,
the drilling spindle is turn-
ing - depending on the pre-
viously selected speed - for
a few seconds more.
Img.1-2:
EMERGENCY-STOP B24H (Vario), B28H
(Vario)
1.11
Drilling table
Seats for T-slots are attached
to the drilling table.
WARNING!
Risk of injury due to
workpieces flying off at
high speed. Securely fix the
workpiece on the drilling
table.
Img.1-3:
Drilling table
1.12
Separating protective devices
1.12.1 Protective cover of the V-belts
A protective cover for the belt
pulleys is mounted on the drill-
ing head. A switch is integrated
in the protective cover which
monitors that the cover is
closed.
INFORMATION
You cannot start the machine if
the protective cover is not
closed.
Img.1-4:
Protective cover
EMERGENCY-
STOP push but-
ton
seats for clamping
blocks
Protective
cover
