Operation
Version 1.0 - 2020-12-22
145
Translation of original instruction
TU2506VB
EN
T
U
2506V
B_GB
_4.
fm
4.20
Mounting of rests
Follow rest and steady rest
Use steady rest or follow rest to support longer parts and prevent the workpiece from flapping
around and flying away.
4.20.1 Mounting of follow rest
Img.4-39: Follow rest
4.20.2 Mounting of steady rest
Img.4-40: Steady rest
4.20.3 Tailstock
The tailstock quill is used to hold the tools (bits, centres, etc.)
Clamp the required tool into the quill of the tailstock.
Use the scale on the sleeve to re-adjust and / or adjust the tool.
Clamp the quill with the clamping lever.
Use the hand wheel to move the sleeve back and forth.
The quill of the tailstock is useable with a drill chuck with countersinking tools.
A
A
3441310
A
A
3441315
