Optimum 3346245, Operating Manual

Page: 21 / 120

Technical specification
Version 1.0.4 - 2020-07-31 21 Translation of the original instructions
MZ4S GB
MZ
4S
_G
B_2.
fm
2.6 Horizontal spindle
Spindle seat ISO 40
Distance horizontal spindle - cross table [mm] 130 - 390
2.7 Spindle speeds
Speeds

„Img.4-2: Speed table“ on page 36
Gear stages 18
2.8 Table feed
max. X axis travel
(cross table, manual travel))
560 mm
( 600 mm )
max. Z axis travel
(cross table, manual travel)
350 mm
( 390 mm )
max. Y axis travel
(cross table, manual travel)
440 mm
( 480 mm )
Feed force 1600N
2.9 Horizontal milling table
Table length [mm] 900
Table width [mm] 500 mm
T-slot size / distance / number 14 mm / 63 mm / 7
max. load horizontal cross table 360 kg
Scale on the X axis handwheel (cross table) 5 mm/rev - graduation 0.02 mm
Scale on the Y axis handwheel (milling head) 5 mm/rev - graduation 0.02 mm
Scale on the Z axis handwheel (cross table) 2.5 mm/rev - graduation 0.02 mm
2.10 Vertical milling table
max. load [ Nm ↓ ] 1800
Table size [ mm ] 250 x 1200
T-slot size / distance / number 14 mm / 63 mm / 3
2.11 Optional pneumatic tool clamp PD
200
Compressed air supply 0.62 MPa (6.2 bar)
Air motor torque 183 Nm
2.12 Dimensions -

Dimensions, Installation plan on page 24
Total weight [kg] 1890
Floor loading 10 KN m
2
2.13 Work area
Keep a work area of at least one metre around the machine free for operation and maintenance.
2.14 Dimensions