Safety
Version 1.0.4 - 2020-07-31
16
Translation of the original instructions
MZ4S
GB
MZ
4S
_G
B_1.
fm
once per day (during one-shift operation),
once per week (when operated occasionally),
after all maintenance and repair work.
Check that prohibition, warning and information signs and the labels on the milling machine
are legible (clean them, if necessary)
and complete (replace them, if necessary).
INFORMATION
Organise the checks according to the following table;
1.11
Personal protective equipment
For certain work personal protective equipment is required.
Protect your face and your eyes: Wear a safety helmet with facial protection when performing
work where your face and eyes are exposed to hazards.
Wear protective gloves when handling pieces or tools with sharp edges.
Wear safety shoes when you assemble, disassemble or transport heavy components.
Use ear protectors if the noise level (emission) in the workplace exceeds 80 dB (A).
Before starting work make sure that the required personnel protective equipment is available at
the work place.
CAUTION!
Dirty or contaminated personnel protective equipment can cause illness. It must be
cleaned after each use and at least once a week.
General check
Equipment
Check
OK
Protective covers
Firmly bolted and not damaged
Signs, Markings
Installed and legible
Sight window
Check for mechanical damage (scratches, cracks)
Polycarbonate windows on page 15
Date:
Checked by (signature):
Functional check
Equipment
Check
OK
Emergency-stop
push button
After actuating an emergency stop push button the milling
machine must be switched off.
Switch cabinet cooling
The cabinet cooling must be running.
Spindle guard
The spindle drive can only be switched on if the spindle
guard is in the machining position.
Date:
Checked by (signature):
Summary of Contents for 3346245
