OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
Version 1.0.1 dated 2016-02-23
Page 9
Original operating instructions
MZ4
│
MZ4V
GB
1.4
Intended use
WARNING!
In the event of improper use, the milling machine
may be a hazard to personnel,
the machine and other property of the operating company and
the functionality of the milling machine may be compromised.
The milling machine is designed and manufactured to be used for milling and drilling cold met-
als or other non-flammable materials or materials that do not constitute a health hazard when
commercial milling and drilling tools are used.
Using this machine it is possible to perform dry processing as well as processing by using cool-
ing lubricants.
"Cooling lubricants“ on page 53
The limit values of the balances of the tools need to be observed.
fixtures“ on page 23
The milling machine must only be installed and operated in a dry and well-ventilated areas.
The milling machine is designed and manufactured to be used in a non-explosive environment.
Intended use
If the milling machine is used in any way other than described above, or modified without the
approval of Maschinen Germany GmbH, then the milling machine is being used improperly.
We will not be held liable for any damages resulting from any operation which is not in accord-
ance with the intended use.
We expressly point out that the guarantee or CE conformity will expire, if any constructive, tech-
nicalor procedural changes are not performed by the company Optimum Maschinen Germany
GmbH.
It is also part of intended use that you
the limits of performance of the milling machine are observed,
the operating manual is observed,
the inspection and maintenance instructions are observed.
Warning: biological hazard!
Warning: suspended loads!
Warning of oxidizing sub-
stances!
Caution, danger of explo-
sive substances!
Warning: danger of slip-
ping!
Filling position: oil
Oil outlet
Protect the environment!
Contact address
