Optimum 3338165, Operating Manual

Page: 38 / 86

Version 1.1.0 - 2020-08-07 38 Translation of original instruction
MH35G │ MH35V EN
M
H
35
G
_M
H
35
V
_
GB
_
4.
fm
4.12.1 Inserting
The milling head is equipped with a collet chuck for
BT30x45° pull studs.

Screw pull studs into the conical seat.

Clean seat in the milling spindle.

Clean cone of the tool.

Mechanical securing of the quick clamping system
( 21 ) to be released.

Push up the spindle level and place the tool into the
spindle.

Release the spindle lever again.

Mechanical securing of the quick clamping system
( 21 ) to be locked.
Img.4-4: Pull stud
4.12.2 Removing

Release mechanical securing of the quick
clamping system ( 21 ).

Firmly hold the tool.

Push up the spindle lever.
Img.4-5: Unfitting
11
7
43
23
M12
45°
21