Safety
Version 1.1.2 - 2022-02-24
56
Translation of original instruction
S 131 GH
EN
S131
GH_GB
_1.
fm
1.12
Safety during operation
We specifically point out the dangers when describing the work with and on the drilling
machine.
CAUTION!
Before switching on the metal band saw make sure that there are
no dangers generated for persons,
no objects are damaged.
Avoid any unsafe work methods:
Make sure that nobody is endangered by your work.
The instructions mentioned in these operating instructions have to be strictly observed
during assembly, operation, maintenance and repair.
Do not work on the metal band saw, if your concentration is reduced, for example, because
you are taking medication.
Observe the accident prevention regulations issued by your Employers Liability Insurance
Association or other supervisory authorities responsible for your company.
Stay at the metal band saw until all movements have come to a complete standstill.
Use the prescribed personnel protective equipment. Make sure to wear a well-fitting work
suit and, if necessary, a hairnet.
Inform the supervisor about all hazards or faults.
1.13
Safety during maintenance
Inform the operators in good time of any maintenance and repair works.
Report all safety relevant changes and performance details of the metal band saw. Any
changes must be documented, the operating instructions updated and machine operators
instructed accordingly.
1.13.1 Disconnecting and securing the metal band saw
Disconnect the main plug of the metal band saw and secure the metal band saw against
restarting. Place a warning sign on the machine.
1.13.2 Using lifting equipment
WARNING!
The use of unstable lifting and load suspension equipment that might break under load
can cause severe injuries or even death.
Check that the lifting and load suspension gear
they have sufficient load carrying,
and that it is in perfect condition.
Observe the accident prevention regulations issued by your Employers Liability
Insurance Association or other supervisory authorities responsible for your company.
Fasten the loads properly.
Never walk under suspended loads!