Safety
Version 1.0.2 - 2020-09-15
16
Translation of original instructions
GT25 | GT30 | GT40
EN
GT25_G
T30_G
T40_G
B_1.
fm
1.11
Personal protective equipment
For certain work, personal protective equipment is required.
Protect your face and your eyes: Wear a safety helmet with facial protection when performing
work where your face and eyes are exposed to hazards.
Wear protective gloves when handling pieces or tools with sharp edges.
Wear safety shoes when you assemble, disassemble or transport heavy components.
Use ear protection if the noise level (emission) in the workplace exceeds 80 dB (A).
Before starting work make sure that the required personnel protective equipment is available at
the work place.
CAUTION!
Dirty or contaminated personnel protective equipment can cause illness. They must be
cleaned after each use and at least once a week.
General check
Equipment
Check
OK
Protective housing on the grinding
wheel
Not damaged and functional
Signs, Markings
Installed and legible
Grinding wheel
Grinding wheel pulled off ?
Grinding wheel with flange
Balanced ?
Date:
Checked by (signature):
Functional check
Equipment
Check
OK
Emergency-stop
push button
After actuating the emergency stop switch, the surface
grinding machine must switch off.
Protective cover grinding wheel
The grinding wheel drive can only be switched on when
the protective cover is closed.
Date:
Checked by (signature):