Safety
Version 1.0.2 - 2020-09-15
14
Translation of original instructions
GT25 | GT30 | GT40
EN
GT25_G
T30_G
T40_G
B_1.
fm
It is your responsibility!
If a safety device has been deactivated or is defective, the surface grinding machine can only
be used again if you
have eliminated the cause of the fault and
you have verified that there is no danger to personnel or objects.
WARNING!
If you bypass, remove or override a safety device in any other way, you are endangering
yourself and other persons working with the surface grinding machine. The possible
consequences include:
injuries due to tools, workpieces or fragments hereof which are flying off at high
speed,
contact with rotating or moving parts,
fatal electrocution,
pulling-in of clothes.
WARNING!
Although the isolating safety devices provided and delivered with the machine are
designed to reduce the risks of coolants, workpieces being ejected or parts of tools,
breaking off grinding wheel or workpieces breaking off, they cannot eliminate these
risks completely. Always work carefully and observe the limit values of the grinding
process.
The surface grinding machine features the following safety devices:
a lockable master switch,
an emergency stop button,
a protective cover on the grinding wheel with position switch
A coolant splash guard around the grinding table.
1.9.1
Lockable master switch
In the "0" position, the lockable master switch can be secured against accidental or non-author-
ised switching on by means of a padlock.
The power supply is interrupted by switching off the master switch.
Except for the areas marked by the pictogram in the margin. In these areas there might be volt-
age, even if the master switch is switched-off.
WARNING!
Dangerous voltage even if the master switch is switched off.
The areas marked by the pictogram might contain live parts, even if the master switch is
switched off.