Safety
Version 1.0.2 - 2020-09-15
10
Translation of original instructions
GT25 | GT30 | GT40
EN
GT25_G
T30_G
T40_G
B_1.
fm
Only metallic, cold and non-flammable materials may be machined with the surface grinding
machine.
In order to avoid misuse, it is necessary to read and understand the operating instructions
before first commissioning.
Operators must be duly qualified.
1.5.1
Avoiding misuse
INFORMATION
The surface grinding machine with step motor control is built to comply with EMC Class C2 to
EN 61800-3. The control and drive components of the surface grinding machine are approved
for industrial and commercial use in industrial supply networks. Use in public supply networks
requires a different configuration and/or additional measures
.
WARNING!
The class C2 (machine tools) is not intended to be used in residential facilities, where
the power is supplied via a public low voltage supply system. In these areas, it may be
difficult to guarantee electromagnetic compatibility due to conducted and emitted
interference.
Regular balancing of the grinding wheel. For this purpose, a balancing device is supplied
with the surface grinding machine.
Adaptation of the oscillating speed and the transverse feed to the material and the work-
piece.
Mount the workpiece firmly and vibration-free on the electromagnet.
Risk of fire and explosion due to the use of flammable materials or cooling lubricants.
Before processing inflammable materials (e.g. aluminium, magnesium) or using inflamma-
ble auxiliary materials (e.g. spirit), you need to take additional preventive measures in order
to avoid health risks.
WARNING!
Risk of breakage of the grinding wheel or workpieces being thrown away.
The magnetizable workpiece must always be attached to the electromagnet in a plane
and fixed manner. Check the secure fastening.
Use cooling and lubricating agents to increase the durability of the grinding wheel and to
improve the surface quality.
Clamping the workpiece on a clean and undamaged clamping surface on the electromag-
net.