Technical specification
Version 1.0.4 - 2021-9-30
24
Originalbetriebsanleitung
GB250B
EN
GB25
0B_G
B.
fm
1.10
Disconnecting and securing the brush deburrer
Disconnect the mains plug before starting maintenance and repairs.
1.11
Emissions
The noise emission of the brush deburrer is in the range of 72 to 76 dB(A). If the brush deburrer
is installed in an area where various machines are in operation, the noise exposure (immis-
sion) on the operator of the brush deburrer at the working place may exceed 80 dB(A).
INFORMATION
This numerical value was measured on a new machine under the operating conditions specified
by the manufacturer. The noise behaviour of the machine might change depending on the age
and wear of the machine.
In addition, the value of the noise emission also depends on manufacturing factors, e.g. the wall
thickness of a pipe to be deburred.
INFORMATION
The specified numerical value represents the emission level and does not necessarily a safe
working level. Though there is a dependency between the degree of the noise emission and the
degree of the noise disturbance it is not possible to use it reliably to determine if further precau-
tion measures are required or not. The following factors influence the actual degree of the noise
exposure of the operator:
Characteristics of the working area, e.g. size or damping behaviour,
other noise sources, e.g. the number of machines,
other processes taking place in proximity and the period of time, during which the operator
is exposed to the noise.
Furthermore, it is possible that the admissible exposure level might be different from country to
country due to national regulations. This information about the noise emission should, how-
ever, allow the operator of the machine to more easily evaluate the hazards and risks.
CAUTION!
Depending on the overall noise exposure and the basic threshold values, machine
operators must wear appropriate hearing protectors. We generally recommend the use
of noise and ear protection.
2
Technical specification
Electrical connection
400V ~ 50Hz
Motor power
1,8 / 1,3 Kw
Current consumption
3,0 A / 2,3 A
Speed [ min
-1
]
2850 / 1450
Brush dimensions
Diameter 250mm, width 40mm,
Shaft bore 25,3mm
Shaft Ø 25mm
0.35mm wire thickness ( standard delivery )
Circumferential speed
37.3 m/s at 2850 min
-1
Extraction socket
50mm
Machine net weight [kg]
36
