Delivery, interdepartmental transport and unpacking
Version 1.0.4 - 2021-9-30
26
Originalbetriebsanleitung
GB250B
EN
GB25
0B_G
B.
fm
Consult Optimum Maschinen Germany GmbH if the machine and accessories are stored for
more than three months or are stored under different environmental conditions than those spec-
ified here.
3.5
Set-up and assembly
3.5.1 Installation site requirements
Organise the working area around the grinding machine according to the local safety regula-
tions.
CAUTION!
The brush deburrer must be firmly connected to the substructure. For this purpose there
are holes in the base to screw the brush deburrer to your worktable.
INFORMATION
In order to achieve high levels of functionality and machining accuracy, as well as a long ser-
vice life of the machine, the set-up location should meet certain criteria.
The following points should be noted:
The device must only be installed and operated in a dry and well-ventilated place.
The work table must be suitable for the brush deburrer. If necessary, this table must also be
firmly connected to the subfloor.
Provide enough space for set-up and operating personnel and material transport.
Ensure adequate lighting is available (minimum value: 500 Lux, measured at the tool tip). In
the event of a lower level of lighting, additional illumination must be provided, e.g. by means
of a separate workplace light.
The power plug of the brush deburrer must be readily accessible.
CAUTION!
Arrange the machine's connection cable in such a way that it will not cause a tripping
hazard.
3.5.2
Extraction socket
For certain operations, it may be appropriate to
connect the brush deburrer to an extraction sys-
tem or to an industrial vacuum cleaner. The suc-
tion connection at the rear of the brush deburrer
is 50 mm in outer diameter.
P
50
