Operation
Version 1.0.1 - 2020-11-12
10
Translation of original instruction
GU35P
EN
GU35P
_GB
.f
m
3.6
Dimensions
Img.3-1:
GU 35P
3.7
First commissioning
ATTENTION!
Before commissioning the machine, all bolts, fastenings and protections must be
checked and retightened as necessary!
WARNING!
Danger from the use of unsuitable polishing wheels. Only use polishing wheels that can
withstand the speed requirements and loads that occur.
3.7.1
Power supply
Connect the electrical supply cable.
Check the fusing (fuse) of your electrical supply.
Check the phase sequence, the polishing wheel must rotate in the direction indicated.
4
Operation
Before you start polishing, check that the workpiece is free of oil, grease and paint residues.
This prevents smearing or soiling of the polishing wheel. For polishing wheels, there are
additives that can improve the polishing effect.
Check the condition of the polishing wheels. Polishing wheels must be replaced if they are
dirty or produce an imbalance due to wear.
Polishing wheels must be disposed of in an environmentally friendly manner.
916
39
3
P
11
300
17
2
360
276
57
P
35
0
40
803
