Maintenance
Version 2.1.2 2018-09-13
Page 44
Translation of the original instructions
B17Pro | B23Pro | B26Pro | B33Pro
GB
B17_
B23_
B26_
B33_
GB_
5
.f
m
OPTIMUM
M A S C H I N E N - G E R M A N Y
®
every six
months
Electro
n
ics
Testing
Check the electrical equipment / parts of the drilling machine.
"Qualification of personnel“ on page 12
As required
Dril
l d
e
pth
stop
Spindle
return spring
Loosen both nuts on the spring housing, approximately 1/4
counter-clockwise rotation. Under no circumstances must
the nuts be completely removed from the screw thread!
Hold the spring housing with one hand, while using the
other hand to slowly remove the housing.
Rotate the spring housing about its own axis until the pin
snaps into the next notch.
Abb.5-2: Spindle return spring
INFORMATION
If the tension has increased, rotate the housing
clockwise and if the tension has decreased rotate
the housing counter-clockwise.
Ensure that the notch is always snapped into the
spring housing properly and subsequently tighten
the nut.
The second nut secures the first nut (capped nut).
When the nuts have been tightened they should not
touch the return spring housing.
Interval
Where?
What?
How?
Spring housing
Cover nut
Nut
