OPTIMUM
M A S C H I N E N - G E R M A N Y
808D
Page 317
Tool Setup
Brief instruction 808D Milling
Operating and Programming — Milling
SEQUENCE
A tool must be loaded to the spindle.
Press the “Machine” key on the PPU
Press the “JOG” key on the MCP
Press the spindle direction key on the MCP to
start/stop the spindle.
Press “Spindle left” on the MCP to start the
spindle in the counter-clockwise direction.
Press “Spindle stop” on the MCP to stop the
spindle.
Press “Spindle right” on the MCP to start the
spindle in the clockwise direction.
Machine
coordinate
system
JOG
spindle
Please make sure all the machine axes are in
safe positions before executing the M function!
Press the “Machine” key on the PPU
Press the “T.S.M” SK on the PPU.
Use the direction key to move the highlighted
cursor to “Other M function” and enter “8”. This
will start the coolant.
Press “CYCLE START” on the MCP.
The coolant function button on MCP is active.
Press the “Reset” key on the MCP to stop the
coolant function.
Press the “Back” SK on the PPU.
User
interface
Execute M
function
T,S,M
Tool change
Spindle speed
Spindle direction
Activate zerooffset
Other M function
rpm
Back
Sett.
Meas.
tool
Meas.
work.
Set
rel
Face
cutt.
Press ´CYCLE START´
to activate above functions.
8
