OPTIMUM
M A S C H I N E N - G E R M A N Y
808D
Page 312
Operating and Programming — Milling
Tool Setup
Brief instruction 808D Milling
SEQUENCE
A new tool edge can be added in this way and different lengths and radii can be
entered as required.
The red circle shows the actual active tool and tool edge,the purple circle shows how
many tool edges have been created and the related data for each tool edge.
A maximum of nine tool edges can be created for each tool!
Different tool lengths and radii can be saved in different tool edges as
required.
Please select the right tool edge for machining according to
requirement!
Step 2
New
edge
Reset
edge
Delete
edge
Back
User
data
Sett.
data
R
var.
Work
offset
Tool
wear
Tool
list
Tool list
Active tool no
Geometry
Radius
Lenght1
Type
Load tool into
Spindle
A tool must have been created in the system
before it can be loaded into the active position.
Press the “Machine” key on the PPU
Press “CYCLE START” on the MCP
Press the “Back” SK on the PPU
Press the “JOG” key on the MCP
Press the “T.S.M” SK on the PPU
Enter tool number “1” in “T”
T,S,M
Tool change
Spindle speed
Spindle direction
Activate zerooffset
Other M function
rpm
Back
Sett.
Meas.
tool
Meas.
work.
Set
rel
Face
cutt.
Press ´CYCLE START´
to activate above functions.
back
