Operation
Version 1.1.2 dated 2019-05-07
Page 269
Translation of the original instructions
F80 | F105
GB
F
80_F105
_GB
_6.
fm
OPTIMUM
M A S C H I N E N - G E R M A N Y
®
6.5.3
Using the electronic handwheel
The electronic handwheel can always be used when
the CNC- machine is referenced,
the LED on the button <HANDWHEEL> lights up.
Press the button <HANDWHEEL> on the machine control panel to use the electronic hand-
wheel.
WARNING!
A manual movement of axes with open door is not possible. The F80 | F105 has no
acknowledgement button to allow movement of axes with open slide door.
The lock switch on the slide door may only be unlocked for maintenance and repair
work.
Pos.
No
Designation
Description
Rotary switch
Selector switch to control the individual
axis.
Rotary switch
Selector switch for the feed speed (3
stages).
Hand wheel
Handwheel to travel the individual
axes.
<Emergency stop
button>
The emergency stop push button
switches off the CNC- machine.
Push button resp.
acknowledge-
ment button
In the setting mode it is necessary to
actuate the acknowledgement button
in order to expressively allow the
movement of the individual axes.
1
2
3
4
5
1
2
3
4
5
