Technical specification
Version 1.0.1 - 2020-08-10
10
Translation of original instruction
GU30S
EN
GU30S
_GB
.f
m
2
Technical specification
3
Delivery, interdepartmental transport and unpacking
CAUTION!
Injuries caused by parts falling over or off a forklift, pallet truck or transport vehicle. Only
use means of transport that can carry the total weight and are suitable for it.
3.1
Notes on transport, installation and unpacking
Improper transport of individual devices and minor machines, unsecured devices and minor
machines stacked on top of each other or next to each other in packed or already unpacked
condition is accident-prone and can cause damage or malfunctions for which we do not grant
any liability or guarantee.
Transport the scope of delivery secured against shifting or tilting with a sufficiently dimen-
sioned industrial truck to the installation site.
3.1.1
General risks during internal transport
CAUTION: DANGER OF TIPPING!
The device may be lifted unsecured by a maximum of 2cm.
Employees must be outside the danger zone, the reach of loads. Warn employees and, if
necessary, advise employees of the hazard.
Act responsibly during transport and always consider the consequences. Refrain from daring
and risky actions.
Gradients and descents (e.g. driveways, ramps and the like) are particularly dangerous. If such
passages are unavoidable, special caution is required.
Electrical connection
3x 400V ~50Hz ( 60 Hz )
Motor power
2.2 kW
Speed ( 50 Hz ) [ rpm
]
1450
Speed ( 60 Hz ) [ rpm
]
1740
Grinding wheel [mm]
Ø 300 x 50
Grinding speed of grinding wheel ( 50 Hz ) [ m/s ]
22
Grinding speed of grinding wheel ( 60 Hz ) [ m/s ]
27
Grinding speed of belt sander ( 50 Hz ) [ m/s ]
10
Grinding speed of belt sander ( 60 Hz ) [ m/s ]
12
Length of sanding belt/ -width [mm]
1190 x 100
Suction connection on grinding wheel
Ø 35 and Ø 50
Suction connection on belt sander
Ø 30
Machine weight [kg]
61
Shaft diameter [mm]
Ø25
Grinding wheel bore diameter [mm]
Ø75
Work area
Keep a work area of at least one metre around the machine
free for operation and maintenance.
