Operation
Version 1.1.3 - 2020-07-21
35
Translation of the original instructions
B34H | B34HV
GB
B34H_B
34HV_
GB_
4
.f
m
Operating control lamp
The operating control lamp on the operating panel has to flash.
Machine illumination ON/OFF
Switches the illumination on or off.
Main switch
Interrupts or connects the power sup-
ply.
Abb.5-2:
Machine illumination B34H
5.2.2
Drill depth stop
When drilling several
holes of the same depth
you can use the drill depth
stop.
Loosen the locking
screw and turn the
graduated collar until
the required drilling
depth matches with
the indicator.
Re-tighten the locking
screw.
Abb.5-3:
Drill depth stop
5.2.3
Control panel B34 H Vario
Abb.5-4: Operating element on the control panel B24HV
Main switch
Machine illumination
Scale
Locking screw
Drill depth stop
RPM indication
EMERGENCY STOP impact
switch
Selection switch for operating
mode
Turning direction
Thread cutting / Automatic
Machine lamp ON/OFF
Coolant pump ON / OFF
Push button "ON"
Push button "OFF"
Potentiometer
