10
4.7
Functions- and sight check
4.7.1
General
•
Device need to be checked before each use in regard to functions and condition!
•
Maintenance, lubrication and trouble shooting only in disused mode!
•
At safety catching defects device need to be repaired immediately. Only after proper
repair device can be used again!
•
Stop use of device immediately at cracks on supporting elements!
•
Operation manual of device has to be accessible always on job-sites.
•
Never remove machine label from device!
•
Illegible signs need to be renewed!
4.8
Safety during operation
4.8.1
General
•
Operation of device in near-ground only! Die Arbeit mit dem Gerät darf nur in
bodennahem Bereich erfolgen. Never pan device over persons!
•
In general it is prohibited to stay under hovered load.
Mortal danger!!!
•
Never pull loads inclined.
•
Never exceed lifting capacities and nominal diameters of device.
•
Jerky lifting and lowering of the load caused e.g. by too fast driving with carrier
vehicle on rough terrain is
PROHIBITED
! Load could slip off.
4.8.2
Arbitrary conversions
Restraint
Arbitrary conversions on device or use of self-built instruments endanger body
and life and are strictly prohibited!
