Instructions Manual
M20x Camera Control with Cross-line, Zoom Display and 2 Save/Recall
Product No. OP-009 032
Overview
This optional software enables M20x EasyView and Freesight cameras
to display zoom factor, Cross line and to save/recall 2 presets, A and B.
Three display modes are supported:
1. Zoom Display:
The zoom factor is displayed on up-right corner and current preset
is displayed on down right corner. 2 presets can be saved and
recalled.
2. Zoom Display and Cross Line.
A cross line is displayed on the center of the screen. The zoom
factor is displayed on up-right corner and current preset is
displayed on down right corner. 2 presets can be saved and
recalled.
3. Standard.
Display is off. Control box will function as standard. Save/recall
function is not available in this mode.
