background image

2043287012    2800K
2043407012    4000K

Art-Nr.:

09-3112.072
20-2013

Round 200-1800 Downlight

PM-011/09/12

INSTRUCTION MANUAL

Voltage

220V~240V AC 50/60 Hz

Rated Current

Color

Dimmable

Compliance with Clipsal E32 Triac Dimmer

Warm White

Wattage

Round 200-1800 Downlight

135mA

28W

Natural White

Daylight

Installation Method

1

THIS PRODUCT IS NOT SUITABLE FOR COVERING WITH THERMAL INSULATED MATERIAL.

WARNING : 1. This product is not designed for on-site maintenance and may not be disassembled. 

2. Always turn off power prior to installation or replacement. 

Limited Warranty

3 years.Please refer to Optiled  L  im

   ited Warranty Statement.

Warranty : Please contact local Optiled office or distributors for more information.

*Technical data are based on optimum conditions and actual performance may vary.

Country of origin : China

© 2012 OPTILED, all rights reserved.

The                                logo is a registered trademark.

ACCESS ABOVE CEILING REQUIRED.

ALWAYS CONNECT GROUND LEAD TO FIXTURE WHERE APPLICABLE.

INSTALL THIS LUMINAIRE THAT HAS THE CONSTRUCTION FEATURE DIMENSION SHOWN IN DRAWINGS.

RISK OF FIRE OR ELECTRIC SHOCK -  USE IN DRY LOCATION ONLY.

RISK OF FIRE OR ELECTRIC SHOCK – DO NOT USE WHERE DIRECTLY EXPOSED TO WATER. 

TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE WIRING TO EDGES OF SHEET METAL OR 
OTHER SHARP OBJECTS.

DO NOT MAKE OR ALTER ANY OPEN HOLES IN AN ENCLOSURE OF WIRING OR ELECTRICAL COMPONENTS 
DURING KIT INSTALLATION.

1

Open a round hole with 205mm diameter on 
the mounting surface (thickness of material 
between 5~16mm).

2

Open the wiring compartment cover with a screw driver. Put the main wire through the hole on the 
waterproof cable gland (not provided, UL/ CUL listed watertight type cover IFFX/7 is recommended. 
Grounding is required if metal cover was used.) 

  

Email: [email protected]
Website‛ 

www.optiled.com

5-16mm

Ceiling

Ø205mm

Warning:  # 18AWG solid or stranded copper conductor should be used.
                

Should only handled by qualified electrician.

**Compliance with Clipsal E32 Triac Dimmer

IP20

IP44

**

*

* IP20 Recessed part

IP44 Accessible part

Reviews: